LOCTITE® ABLESTIK 84-1LMISR4
Kenmerken en voordelen
This rigid, electrically conductive, epoxy-based die attach adhesive is perfect for small components assembly.
LOCTITE® ABLESTIK 84-1LMISR4 is one of the most widely used die-attach products in the semiconductor industry. This electrically conductive adhesive is specially formulated for use in high throughput, automated die-attach equipment. You can rely on minimum adhesive dispense and die put down dwell times, minimal tailing and stringing, and a work life up to two weeks for small series assemblies.
Meer info
Documenten en downloads
Op zoek naar een TDS of MSDS in een andere taal?
Technische informatie
Aanbevolen voor gebruik met | Bedradingsframe: Goud, Bedradingsframe: Zilver |
Aanbrengmethode | Doseersysteem |
Aantal componenten | 1-component |
Coëfficiënt van thermische uitzetting (CTE) | 40.0 ppm/°C |
Coëfficiënt van thermische uitzetting (CTE), Above Tg | 150.0 ppm/°C |
Extraheerbare ionische inhoud, Chloride (CI-) | 20.0 ppm |
Extraheerbare ionische inhoud, Kalium (K+) | 10.0 ppm |
Extraheerbare ionische inhoud, Natrium (Na+) | 10.0 ppm |
Fysieke vorm | Pasta |
Glasovergangstemperatuur (Tg) | 120.0 °C |
Kleur | Zilverkleurig |
Thermische geleidbaarheid | 2.5 W/mK |
Thixotrope index | 5.6 |
Toepassingen | Matrijsmontage |
Trekmodulus, @ 250.0 °C | 300.0 N/mm² (44000.0 psi ) |
Uithardingsschema, @ 175.0 °C | 1.0 hr. |
Uithardingstype | Uitharding door warmte |
Viscositeit, Brookfield CP51, @ 25.0 °C Speed 5 rpm | 8000.0 mPa.s (cP) |
Vochtopname, 168 hr. @ 85°C/85% RH | 0.6 % |
Volumeweerstandsvermogen | ≤ 0.0002 Ohm cm |