BERGQUIST® GAP PAD® TGP 2000
Şöyle bilinir Gap Pad® 2000S40
Özellikleri ve Faydaları
This silicone based, highly conformable, reinforced "S-Class" gap filling material is recommended for low-stress applications that require a mid to high thermally conductive interface material.
The highly conformable nature of BERGQUIST® GAP PAD TGP 2000 means the pad can fill air voids and air gaps with stepped topography, rough surfaces, and high stack-up tolerances. It has inherent natural tack on both sides of the material, allowing for stick-in-place characteristics during application assembly. It’s supplied with protective liners on both sides, and the top side has reduced tack for ease of handling.
Daha fazlasını okuyun
Dokümanlar ve İndirilebilir Belgeler
Başka bir dilde bir TDS veya SDS mi arıyorsunuz?
İlave Dokümanlar
Teknik Bilgi
Dielektrik sabiti, @ 1kHz | 6.0 |
Dielektrik Çökümü Voltajı | 5000.0 Vac |
Hacim Özdirenci | 1×10 Ohm m |
Isı Kapasitesi, ASTM E1269 | 0.6 J/g-K |
Isı İletkenliği | 2.0 W/mK |
Renk | Gri |
Shore Sertliği, Thirty second delay value, ASTM D2240 Kitle Kauçuk Shore 00 | 30.0 |
Standart Kalınlık | 0.508 - 3.175 mm |
Yanma Hızı | V-0 |
Yoğunluk | 2.9 g/cm³ |
Çalışma Sıcaklığı | -60.0 - 200.0 °C |