BERGQUIST® GAP PAD® TGP 2000
Žinoma kaip Gap Pad® 2000S40
Savybės ir privalumai
This silicone based, highly conformable, reinforced "S-Class" gap filling material is recommended for low-stress applications that require a mid to high thermally conductive interface material.
The highly conformable nature of BERGQUIST® GAP PAD TGP 2000 means the pad can fill air voids and air gaps with stepped topography, rough surfaces, and high stack-up tolerances. It has inherent natural tack on both sides of the material, allowing for stick-in-place characteristics during application assembly. It’s supplied with protective liners on both sides, and the top side has reduced tack for ease of handling.
Aprašymas
Dokumentai ir atsisiuntimai
Ieškote TDL arba SDL kita kalba?
Papildomi dokumentai
Techniniai duomenys
| Darbinė temperatūra | -60.0 - 200.0 °C |
| Dielektrinio gedimo įtampa | 5000.0 Vac |
| Dielektrinė konstanta, @ 1kHz | 6.0 |
| Liepsnos įvertinimas | V-0 |
| Spalva | Pilka |
| Standartinis storis | 0.508 - 3.175 mm |
| Tankis | 2.9 g/cm³ |
| Tūrio varža | 1×10 Ohm m |
| Šilumos laidumas | 2.0 W/mK |
| Šilumos talpa, ASTM E1269 | 0.6 J/g-K |
| „Shore“ kietumas, Thirty second delay value, ASTM D2240 Birioji guma Shore 00 | 30.0 |
BERGQUIST® GAP PAD® TGP 2000
This silicone based, highly conformable, reinforced "S-Class" gap filling material is recommended for low-stress applications that require a mid to high thermally conductive interface material.