LOCTITE® ABLESTIK 8008HT
Conhecido como ABLECOAT 8008HT
Características e Vantagens
LOCTITE ABLESTIK 8008HT, Proprietary Hybrid Chemistry, Die Attach
LOCTITE® ABLESTIK 8008HT adhesive is designed for high power devices in high UPH environment. It offers a lead-free alternative to soft solder and eutectic and can potentially reduce the layers of backside metallization required. This material can be applied to a wafer backside by stencil printing and then B-staged in an oven. The adhesive can then be cured after die attach in an in-line process exhibiting a consistent, void-free bondline without bleed. LOCTITE ABLESTIK 8008HT should be used with a pressure sensitive dicing tape and is not compatible with UV dicing tapes.
Ler mais
Documentos e Transferências
Procura uma FDT ou FDS noutro idioma?
Documentos Adicionais
Informação Técnica
Aplicações | Cravação por afundamento |
Coefficiente di espansione termica (CTE) | 37.0 ppm/°C |
Coefficiente di espansione termica (CTE), Above Tg | 62.0 ppm/°C |
Condutividade térmica | 11.0 W/mK |
Conteúdo iónico extraível, Cloreto (CI-) | 9.0 ppm |
Conteúdo iónico extraível, Potássio (K +) | 9.0 ppm |
Conteúdo iónico extraível, Sódio (Na +) | 9.0 ppm |
Cor | Prata |
Cronograma de cura, Snap Cure @ 170.0 °C | 20.0 seg. |
Módulo de tracção, @ 250.0 °C | 2451.0 N/mm² (355340.0 psi ) |
Resistividade volumétrica | 0.00005 Ohm cm |
Resistência ao cisalhamento RT, 2 x 2 mm Si die on Cu leadframe | 6.0 kg-f |
Resistência ao cisalhamento do molde quente, @ 260.0 °C 2 x 2 mm Si die on Cu LF | 2.6 kg-f |
Temperatura de transição do vidro (Tg) | 264.0 °C |
Tipo de cura | Cura de Calor |
Viscosidade, Brookfield CP51, @ 25.0 °C Speed 5 rpm | 50000.0 mPa.s (cP) |
Índice tixotrópico | 4.0 |