LOCTITE® ABLESTIK 8008HT
Tuntud kui ABLECOAT 8008HT
Omadused ja eelised
A 1-part, proprietary hybrid-chemistry, lead-free, electrically and thermally conductive die-attach adhesive specifically formulated for high-power devices in a high-UPH environment.
LOCTITE® ABLESTIK 8008HT die-attach adhesive is perfect for high-power devices in a high-UPH environment. A lead-free alternative to soft solder and eutectic, it can potentially reduce the layers of backside metallisation required. It can be applied to a wafer backside by stencil printing, B-staged in an oven, then be cured after die attach in an in-line process exhibiting a consistent, void-free bond line without bleed. Should be used with a pressure-sensitive dicing tape. Not compatible with UV dicing tapes.
Lugege rohkem
Dokumendid ja allalaadimised
Otsite TDS-i või SDS-i teises keeles?
Lisadokumendid
Tehniline teave
| Ekstraheeritav ioonisisu, Kaalium (K+) | 9.0 ppm |
| Ekstraheeritav ioonisisu, Kloriid (CI-) | 9.0 ppm |
| Ekstraheeritav ioonisisu, Naatrium (Na+) | 9.0 ppm |
| Klaasistumistemperatuur (Tg) | 264.0 °C |
| Kuumlõike nihkejõud, @ 260.0 °C 2 x 2 mm Si die on Cu LF | 2.6 kg-f |
| Kõvenemisaeg, Snap Cure @ 170.0 °C | 20.0 sekund |
| Mahu resistiivsus | 0.00005 Ohm cm |
| RT kuumlõike nihkejõud, 2 x 2 mm Si die on Cu leadframe | 6.0 kg-f |
| Rakendused | Stantskinnitus |
| Soojusjuhtivus | 11.0 W/mK |
| Soojuspaisumise koefitsient (CTE) | 37.0 ppm/°C |
| Soojuspaisumise koefitsient (CTE), Above Tg | 62.0 ppm/°C |
| Tahkumistüüp | Kuumkõvenemine |
| Tiksotroopne indeks | 4.0 |
| Tõmbemoodul, @ 250.0 °C | 2451.0 N/mm² (355340.0 psi ) |
| Viskoossus, Brookfield CP51, @ 25.0 °C Speed 5 rpm | 50000.0 mPa.s (cP) |
| Värvus | Hõbedane |
LOCTITE® ABLESTIK 8008HT
A 1-part, proprietary hybrid-chemistry, lead-free, electrically and thermally conductive die-attach adhesive specifically formulated for high-power devices in a high-UPH environment.