LOCTITE® ABLESTIK QMI529HT
Lastnosti in prednosti
This 1-part, BMI acrylate-based, conductive die-attach adhesive is designed for bonding integrated circuits and components to metal substrates.
LOCTITE® ABLESTIK QMI529HT is a silver, thermally and electrically conductive die-attach adhesive designed as a soft-solder replacement or for high UPH performance applications. It’s typically used on copper, silver-plated copper, pre-plated lead frames (Ni/Pd/Au) and Alloy 42. LOCTITE ABLESTIK QMI529HT exhibits excellent adhesive strength and good resistance to "popcorning" after exposure to reflow temperatures. It’s formulated with a BMI acrylate-based resin and cures when exposed to heat. Maximum productivity is reached through in-line curing, either directly on the die bonder using a post-die bond heater or on the wire bonder preheater.
Preberite več
Dokumenti in prenosi
Ali iščete tehnični list ali varnostni list v drugem jeziku?
Tehnične informacije
| Fizična oblika | Pasta |
| Glavne značilnosti | Prevodnost: Električna prevodnost, Prevodnost: Termična prevodnost |
| Izvlečna ionska vsebina, Fluorid (F-) | 20.0 ppm |
| Izvlečna ionska vsebina, Kalij (K+) | 20.0 ppm |
| Izvlečna ionska vsebina, Klorid (CI-) | 20.0 ppm |
| Izvlečna ionska vsebina, Natrij (Na+) | 20.0 ppm |
| Koeficient toplotnega raztezanja (CTE) | 53.0 ppm/°C |
| Natezni modul, @ 25.0 °C | 3300.0 N/mm² (478500.0 psi ) |
| Način strjevanja | Strjevanje na podlagi toplote |
| Primeri uporabe | Pritrjevalniki |
| Priporočeno za uporabo s/z | Vodilno ogrodje: Srebro, Vodilno ogrodje: Zlato |
| Strižna trdnost RT, 7.62 x 7.62 mm die on Ag/Cu leadframe | 57.0 kg-f |
| Strižna trdnost vročega vtiskovanja, @ 245.0 °C 7.62 x 7.62 mm die on Ag/Cu leadframe | 21.0 kg-f |
| Tiksotropni indeks | 4.8 |
| Število komponent | 1 Del |
LOCTITE® ABLESTIK QMI529HT
This 1-part, BMI acrylate-based, conductive die-attach adhesive is designed for bonding integrated circuits and components to metal substrates.