LOCTITE® ABLESTIK QMI529HT
Características y Ventajas
This 1-part, BMI acrylate-based, conductive die-attach adhesive is designed for bonding integrated circuits and components to metal substrates.
LOCTITE® ABLESTIK QMI529HT is a silver, thermally and electrically conductive die-attach adhesive designed as a soft-solder replacement or for high UPH performance applications. It’s typically used on copper, silver-plated copper, pre-plated lead frames (Ni/Pd/Au) and Alloy 42. LOCTITE ABLESTIK QMI529HT exhibits excellent adhesive strength and good resistance to "popcorning" after exposure to reflow temperatures. It’s formulated with a BMI acrylate-based resin and cures when exposed to heat. Maximum productivity is reached through in-line curing, either directly on the die bonder using a post-die bond heater or on the wire bonder preheater.
Leer más
Documentos y Descargas
¿Está buscando un TDS o SDS en otro idioma?
Información técnica
| Aplicaciones | Unión |
| Características principales | Conductividad: Conductividad Eléctrica, Conductividad: Conductor Térmico |
| Coeficiente de dilatación térmica (CDT) | 53.0 ppm/°C |
| Contenido iónico extraíble, Cloruro (CI-) | 20.0 ppm |
| Contenido iónico extraíble, Fluoruro (F-) | 20.0 ppm |
| Contenido iónico extraíble, Potasio (K+) | 20.0 ppm |
| Contenido iónico extraíble, Sodio (Na+) | 20.0 ppm |
| Forma física | Pasta |
| Módulo de tracción, @ 25.0 °C | 3300.0 N/mm² (478500.0 psi ) |
| Número de componentes | Monocomponente |
| Resistencia al corte a temperatura ambiente, 7.62 x 7.62 mm die on Ag/Cu leadframe | 57.0 kg-f |
| Resistencia al corte con calor, @ 245.0 °C 7.62 x 7.62 mm die on Ag/Cu leadframe | 21.0 kg-f |
| Se recomienda su uso con | Bastidor de conductores: Oro, Bastidor de conductores: Plata |
| Tipo de curado | Curado Térmico |
| Índice tixotrópico | 4.8 |
LOCTITE® ABLESTIK QMI529HT
This 1-part, BMI acrylate-based, conductive die-attach adhesive is designed for bonding integrated circuits and components to metal substrates.