LOCTITE® ECCOBOND LUX 3042M

Características e Vantagens

Electrically non-conductive adhesive designed for use in the assembly of temperature-sensitive electronic components. A dual cure system allows for maximum performance.
For good electrically non-conductive adhesion to a variety of substrates, try LOCTITE® ECCOBOND LUX 3042M. This dual cure adhesive is specially designed for assembling temperature sensitive electronic components, and is formulated to initially cure when exposed to UV light, followed by a secondary thermal cure for maximum performance.
Ler mais

Informação Técnica

Cronograma de cura, @ 120.0 °C 30.0 min.
Intensidade de luz do programa de cura 100.0 mW/cm²
Número de componentes Monocomponente
Temperatura de armazenamento -40.0 °C
Tipo de cura Cura de Calor
Viscosidade, Cone 20 mm, Angle 2° Spindle TA, Shear Rate 15 s⁻¹ 85000.0 mPa.s (cP)
Índice tixotrópico 1.2