LOCTITE® ECCOBOND LUX 3042M

Merkmale und Vorteile

Electrically non-conductive adhesive designed for use in the assembly of temperature-sensitive electronic components. A dual cure system allows for maximum performance.
For good electrically non-conductive adhesion to a variety of substrates, try LOCTITE® ECCOBOND LUX 3042M. This dual cure adhesive is specially designed for assembling temperature sensitive electronic components, and is formulated to initially cure when exposed to UV light, followed by a secondary thermal cure for maximum performance.
Weiterlesen

Technische Informationen

Anzahl Komponenten 1K
Aushärtetechnik Aushärtung durch Wärme
Aushärtezyklus, @ 120.0 °C 30.0 Min.
Aushärtungsplan Lichtintensität 100.0 mW/cm²
Lagertemperatur -40.0 °C
Thixotropie Index 1.2
Viskosität, Cone 20 mm, Angle 2° Spindle TA, Shear Rate 15 s⁻¹ 85000.0 mPa.s (cP)