LOCTITE® ECCOBOND LUX 3042M
Omadused ja eelised
Electrically non-conductive adhesive designed for use in the assembly of temperature-sensitive electronic components. A dual cure system allows for maximum performance.
For good electrically non-conductive adhesion to a variety of substrates, try LOCTITE® ECCOBOND LUX 3042M. This dual cure adhesive is specially designed for assembling temperature sensitive electronic components, and is formulated to initially cure when exposed to UV light, followed by a secondary thermal cure for maximum performance.
Lugege rohkem
Dokumendid ja allalaadimised
Otsite TDS-i või SDS-i teises keeles?
Tehniline teave
| Komponentide arv | 1-komponentne |
| Kõvenemisaeg, @ 120.0 °C | 30.0 minut |
| Kõvenemisaega valgusintensiivsus | 100.0 mW/cm² |
| Säilitustemperatuur | -40.0 °C |
| Tahkumistüüp | Kuumkõvenemine |
| Tiksotroopne indeks | 1.2 |
| Viskoossus, Cone 20 mm, Angle 2° Spindle TA, Shear Rate 15 s⁻¹ | 85000.0 mPa.s (cP) |
LOCTITE® ECCOBOND LUX 3042M
Electrically non-conductive adhesive designed for use in the assembly of temperature-sensitive electronic components. A dual cure system allows for maximum performance.