LOCTITE® CL30 LED Flood Curing Single Controller
U svojstvu LOCTITE 97104
Značajke i prednosti
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.
This LOCTITE® CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Flood Arrays to cure UV and visible light cure adhesives. The Flood Arrays are available in 365 nm (item #2139182) and 405 nm (item #2139180) wavelengths. It controls the time that the LED is kept on during the cure cycle. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through.
Dodatne informacije
Dokumenti i preuzimanja
Nema dostupnih dokumenata i preuzimanja za vašu lokaciju i jezik. Možete pokušati pretražiti dokument na drugom jeziku
Tehnički podaci
Primjene | Reflektorsko LED stvrdnjavanje |
Služi za nanošenje | Ljepila za stvrdnjavanje vidljivim i UV svjetlom |
Valna duljina, Item #2139180 | 405.0 nm |
Valna duljina, Item #2139181 | 380.0 nm |
Valna duljina, Item #2139182 | 365.0 nm |
Vrsta žarulje, Preporučeno | LED |