LOCTITE® CL30 LED Flood Curing Single Controller
Zināms kā LOCTITE 97104
Iezīmes un ieguvumi
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.
This LOCTITE® CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Flood Arrays to cure UV and visible light cure adhesives. The Flood Arrays are available in 365 nm (item #2139182) and 405 nm (item #2139180) wavelengths. It controls the time that the LED is kept on during the cure cycle. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through.
Apraksts
Dokumenti un lejupielādes
Jūsu atrašanās vietā un valodā nav pieejams neviens dokuments vai lejupielāde. Varat mēģināt meklēt dokumentu citā valodā
Tehniskā informācija
| Izmantots uzklāšanai | UV un redzamajā gaismā sacietējoša līmviela |
| Pielietojumi | Sacietināšana ar LED plūsmas konstrukciju |
| Spuldzes veids, Ieteikums | Gaismas diode |
| Viļņa garums, Item #2139180 | 405.0 nm |
| Viļņa garums, Item #2139181 | 380.0 nm |
| Viļņa garums, Item #2139182 | 365.0 nm |
LOCTITE® CL30 LED Flood Curing Single Controller
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.