LOCTITE® CL30 LED Flood Curing Single Controller
Features and Benefits
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.
This LOCTITE® CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Flood Arrays to cure UV and visible light cure adhesives. The Flood Arrays are available in 365 nm (item #2139182) and 405 nm (item #2139180) wavelengths. It controls the time that the LED is kept on during the cure cycle. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through.
- LED flood curing system offering long-life, energy-efficient, instant on/off performance
- Simple and easy control of one LED flood head
- High Intensity
- Indicator lights for status and alarms
- Included in the Box: (1) CL30 LED Flood Curing Single Controller, (1) AC power cord, (1) operating manual
- LED heads stackable in both X and Y directions
- Large cure area – 100mm x 100mm
- Digital cure time indicator 0.1 to 99.9 seconds
- End of Cycle signal and Error Relay signal available via output connector
- RoHS compliant
- Components required for operation: (1) controller, (1) light source
Technical Information
| Applications | LED flood array curing |
| Bulb type, Recommended | LED |
| Used to dispense | UV and visible light cure adhesives |
| Wavelength, Item #2139180 | 405.0 nm |
| Wavelength, Item #2139181 | 380.0 nm |
| Wavelength, Item #2139182 | 365.0 nm |
LOCTITE® CL30 LED Flood Curing Single Controller
The LOCTITE CL30 LED Flood Curing Single Controller supplies electrical power to the LOCTITE CL30 LED Arrays to cure UV and visible light cure adhesives.