LOCTITE® ECCOBOND FP4802
Známe ako FP4802 30CC SEMCO 50.4G -40CD
Vlastnosti a výhody
LOCTITE ECCOBOND FP4802 is a high purity, liquid encapsulant designed for use in applications utilizing lead-free solder. This product can withstand solder reflow temperatures up to 260°C after being exposed to JEDEC level 2 (85°C/60% RH, 168hours) preconditioning. It was formulated to meet “Green” non-halide objectives of many technical users and for temperature cycling ranges up to -65 to 150°C. LOCTITE ECCOBOND FP4802 features excellent flow properties allowing the material to penetrate fine pitch wires and deep cavities without entrapping voids. A cavity or potting dam is required for flow control. LOCTITE ECCOBOND FP4802 is suitable for bare chip protection of a variety of advanced packages, such as Ball Grid Arrays (BGA’s), Chip Scale Packages (CSP’s), Plastic Ball Grid Arrays (PBGA’s), and full arrays on Low Temperature cofired Ceramic (LTCC).
LOCTITE® ECCOBOND FP4802 is a high purity, liquid encapsulant designed for use in applications utilizing lead-free solder. This product can withstand solder reflow temperatures up to 260°C after being exposed to JEDEC level 2 (85°C/60% RH, 168hours) preconditioning. It was formulated to meet “Green” non-halide objectives of many technical users and for temperature cycling ranges up to -65 to 150°C. LOCTITE ECCOBOND FP4802 features excellent flow properties allowing the material to penetrate fine pitch wires and deep cavities without entrapping voids. A cavity or potting dam is required for flow control. LOCTITE ECCOBOND FP4802 is suitable for bare chip protection of a variety of advanced packages, such as Ball Grid Arrays (BGA’s), Chip Scale Packages (CSP’s), Plastic Ball Grid Arrays (PBGA’s), and full arrays on Low Temperature cofired Ceramic (LTCC).
Viac info
Dokumenty na prevzatie
Hľadáte TL alebo KBÚ v inom jazyku
Technické informácie
Extrahovateľný iónový obsah, Chlorid (CI-) | 5.0 ppm |
Extrahovateľný iónový obsah, Draslík (K+) | 5.0 ppm |
Extrahovateľný iónový obsah, Sodík (Na+) | 5.0 ppm |
Koeficient tepelnej rozťažnosti (CTE), Above Tg | 100.0 ppm/°C |
Koeficient tepelnej rozťažnosti (CTE), Below Tg | 20.0 ppm/°C |
Teplota priepustnosti skla (Tg) | 50.0 °C |
Teplota skladovania | -40.0 °C |
Viskozita, Brookfield - HBT, @ 25.0 °C Spindle 7, speed 10 rpm | 80000.0 mPa.s (cP) |