LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Značajke i prednosti
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Dodatne informacije
Dokumenti i preuzimanja
Nema dostupnih dokumenata i preuzimanja za vašu lokaciju i jezik. Možete pokušati pretražiti dokument na drugom jeziku
Tehnički podaci
| Intenzitet svjetlosti, For 380nm source | 1.0 - 18.0 W/cm² |
| Intenzitet svjetlosti, For 405nm source | 1.0 - 27.0 W/cm² |
| Primjene | Točkasto LED stvrdnjavanje |
| Služi za nanošenje | Ljepila za stvrdnjavanje vidljivim i UV svjetlom |
| Valna duljina, Item #2183339 | 380.0 nm |
| Valna duljina, Item #2183340 | 405.0 nm |
| Vrsta rada | UV Vis |
| Vrsta žarulje, Preporučeno | LED |
LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.