LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Omadused ja eelised
Designed for simple and easy control of LOCTITE CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Lugege rohkem
Dokumendid ja allalaadimised
Teie asukoha ja keele kohta puuduvad dokumendid ning allalaadimised. Võite proovida otsida dokumenti teises keeles
Tehniline teave
| Kasutatakse doseerimiseks | UV- ja nähtava valgusega kõvendavad liimid |
| Kolvi tüüp, Soovitatav | LED |
| Lainepikkus, Item #2183339 | 380.0 nm |
| Lainepikkus, Item #2183340 | 405.0 nm |
| Rakendused | Kõvendamine leed-punktvalguse abil |
| Toimimise tüüp | UV Vis |
| Valguse intensiivsus, For 380nm source | 1.0 - 18.0 W/cm² |
| Valguse intensiivsus, For 405nm source | 1.0 - 27.0 W/cm² |
LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Designed for simple and easy control of LOCTITE CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.