LOCTITE 55

Elementi i pogodnosti

Konac za zaptivanje cevnih navoja - trenutno zaptivanje pod punim pritiskom. Dozvoljava podešavanje nakon montaže.
LOCTITE® 55 služi za osiguranje i zaptivanje metalnih i plastičnih cevi i navoja. Nije mu potrebno vreme za očvršćavanje i rezultuje trenutnim zaptivanjem pod punim pritiskom. To je pravi izbor za brzo, jednostavno i pouzdano zaptivanje. Proizvod ima atest za korišćenje u sistemima sa gasom i pijaćom vodom i sertifikovan je od strane NSF/ANSI, Standard 61.
  • Zaptivka opšte namene, za cevne navoje i fitinge
  • Trenutno zaptivanje pod punim pritiskom, bez očvršćavanja
  • Za brzo, jednostavno i pouzdano zaptivanje
  • DVGW/KTW odobrenje za gas i pijaću vodu
  • Testiran u skladu sa EN 751-2 Class ARp i DIN 30660
  • Sertifikovan po NSF/ANSI, Standard 61
Pročitajte više

Dokumenti i preuzimanja

Tehnički podaci

Boja Bela
Odobrenja agencije / Specifikacije DVGW, KTW, NSF

Saveti

Detaljan vodič

1. 1. Preparation

Cleaning: Clean threads if necessary and roughen smooth threads.

2. 2. Application

Wind the cord onto the pipe thread in the same direction as the thread, starting from the end of the pipe. Apply in a criss-fross manner. For recommended number of wraps, see label. Cut the cord with the integrated cutting tool at the top of the tube.

3. 3. Assembly

Assemble using accepted trade practices. Adjustment of 45° is possible after tightening.

4. Which products can be used on metals / plastics?

Metals: all mentioned adhesives but with varying performance characteristics. Plastics: all adhesives other than anaerobic adhesives – recommend silicones, LOCTITE® 55 or other technologies (i.e. CAs) depending on application.

5. Which thread sealants can be used on oxygen systems?

Care must be taken when using adhesives on pure oxygen systems. LOCTITE® 577 has BAM® approval and can be considered. For non-pure systems, any adhesive that is compatible with the selected fittings and operating conditions can be considered.

Česta pitanja