LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Iezīmes un ieguvumi
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Apraksts
Dokumenti un lejupielādes
Jūsu atrašanās vietā un valodā nav pieejams neviens dokuments vai lejupielāde. Varat mēģināt meklēt dokumentu citā valodā
Tehniskā informācija
| Darbības veids | UV Vis |
| Gaismas intensitāte, For 380nm source | 1.0 - 18.0 W/cm² |
| Gaismas intensitāte, For 405nm source | 1.0 - 27.0 W/cm² |
| Izmantots uzklāšanai | UV un redzamajā gaismā sacietējoša līmviela |
| Pielietojumi | LED punktu cietināšana |
| Spuldzes veids, Ieteikums | Gaismas diode |
| Viļņa garums, Item #2183339 | 380.0 nm |
| Viļņa garums, Item #2183340 | 405.0 nm |
LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.