LOCTITE® CL30 LED Flood Curing Quad Controller
Iezīmes un ieguvumi
The LOCTITE CL30 LED Flood Curing Quad Controller supplies power and control for up to four (4) LOCTITE LED Flood Arrays to cure UV and visible light cure adhesives.
The LOCTITE® CL30 LED Flood Curing Quad Controller supplies power and control for up to four (4) LOCTITE CL30 LED Flood Array Light Sources, which are offered in 365 nm (item #2139182) and 405 nm (item #2139180) wavelengths. It is used to cure UV and visible light cure adhesives. The LED Flood Array wavelength is selected according to the curing requirements of the adhesive. For a given irradiance, the exposure time required to fully cure the adhesive depends primarily on the properties of the adhesive and the optical properties of the substrate that the light is transmitted through. The CL30 LED Flood Curing Quad Controller has three different control modes: 1) Timer Mode: Adjustable from 0 to 999 seconds; 2) Level Mode: To set up intensity percentage for each channel; and 3) Advance Mode: Operator needs to define Step, Intensity, and Time.
Apraksts
Dokumenti un lejupielādes
Jūsu atrašanās vietā un valodā nav pieejams neviens dokuments vai lejupielāde. Varat mēģināt meklēt dokumentu citā valodā
Tehniskā informācija
Izmantots uzklāšanai | UV un redzamajā gaismā sacietējoša līmviela |
Pielietojumi | Sacietināšana ar LED plūsmas konstrukciju |
Spuldzes veids, Ieteikums | Gaismas diode |
Viļņa garums, Item #2139180 | 405.0 nm |
Viļņa garums, Item #2139182 | 365.0 nm |