LOCTITE® ABLESTIK 8008
Tuntud kui ABLECOAT 8008
Omadused ja eelised
LOCTITE ABLESTIK 8008, Proprietary Hybrid Chemistry, Die Attach
LOCTITE ABLESTIK 8008 snap curable adhesive is designed for small die sizes (<3mm). It exhibits moderate electrical and thermal conductivity. This material can be applied to a wafer backside by stencil printing and then B-staged in an oven. The adhesive can then be cured after die attach in an in-line process exhibiting a consistent, void-free bondline without bleed. LOCTITE ABLESTIK 8008 should be used with a pressure sensitive dicing tape and is not compatible with UV dicing tapes.
Lugege rohkem
Dokumendid ja allalaadimised
Otsite TDS-i või SDS-i teises keeles?
Tehniline teave
| Ekstraheeritav ioonisisu, Kloriid (CI-) | 4.0 ppm |
| Ekstraheeritav ioonisisu, Naatrium (Na+) | 4.0 ppm |
| Kuumlõike nihkejõud | 2.6 kg-f |
| RT kuumlõike nihkejõud | 6.0 kg-f |
| Rakendused | Stantskinnitus |
| Soojuspaisumise koefitsient (CTE) | 42.0 ppm/°C |
| Tahkumistüüp | Kuumkõvenemine |
| Tõmbemoodul, @ 250.0 °C | 1800.0 N/mm² (261070.0 psi ) |
LOCTITE® ABLESTIK 8008
LOCTITE ABLESTIK 8008, Proprietary Hybrid Chemistry, Die Attach