LOCTITE® CL28 CureJet LED Spot Curing Single Controller

Elementi i pogodnosti

Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Pročitajte više

Dokumenti i preuzimanja

Ne postoje dokumenta i preuzimanja dostupna za Vašu lokaciju i jezik. Možete pokušati na drugom jeziku

Tražite TDS na druom jeziku
Tražite SDS na drugom jeziku

Dodatna dokumenta

LOCTITE CL28 CureJet LED Spot Curing Single Controller Operating Manual
Preuzeti dokument

Srpski

Tehnički podaci

Blag intenzitet, For 380nm source 1.0 - 18.0 W/cm²
Blag intenzitet, For 405nm source 1.0 - 27.0 W/cm²
Koristi se za izlivanje Lepkovi za blago konzerviranje sa UV i vidljivim svetlom
Primene Očvršćavanje LED sijalica
Talasna dužina, Item #2183339 380.0 nm
Talasna dužina, Item #2183340 405.0 nm
Tip rada UV Vis
Tip sijalice, Preporučeno LED