LOCTITE® STYCAST ES 1904
Właściwości i korzyści
LOCTITE STYCAST ES 1904, Epoxy, Potting and Encapsulating
LOCTITE® STYCAST ES 1904 is an opaque, medium-viscosity epoxy resin formulation recommended for small potting and laminating applications, excellent structural, mechanical and electrical properties are required. This two-part adhesive exhibits good wetting, cures at room temperature and develops strong, low shrinkage bonds to most materials including optical fibers, glass ceramics, most metals. It has excellent dimensional stability over a wide temperature range. This product is typically used in applications with an operating range of -60 °C to +125 °C.
Czytaj dalej
Do pobrania
Szukasz Karty Technicznej lub Karty Charakterystyki w innym języku?
Informacje techniczne
Coefficient of thermal expansion (CTE), Above Tg | 190.0 ppm/°C |
Coefficient of thermal expansion (CTE), Below Tg | 68.0 ppm/°C |
Ilość składników | Dwuskładnikowy |
Kolor | Nieprzezroczysty |
Metoda utwardzania | Utwardzanie w temperaturze pokojowej |
Stosunek zmieszania, wg masy | 100 : 46 |
Stosunek zmieszania, wg objętości | 2 : 1 |
Temperatura zeszklenia (Tg) | 80.0 °C |
Twardość według Shore'a, Shore D | 90.0 |
Zastosowania | Kapsułkowanie |
Żywica | |
Gęstość, Żywica @ 25.0 °C | 1.19 g/cm³ |
Lepkość, Żywica @ 25.0 °C | 25000.0 mPa.s (cP) |
Utwardzacz | |
Gęstość, Utwardzacz @ 25.0 °C | 1.09 g/cm³ |
Lepkość, Utwardzacz @ 25.0 °C | 50000.0 mPa.s (cP) |
Wymieszany | |
Żywotność, Wymieszany @ 25.0 °C 100 g mass | 8.0 - 10.0 min. |