LOCTITE® ABLESTIK NCA 2380
Características y Ventajas
This epoxy electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.
LOCTITE® ABLESTIK NCA 2380 dual cure adhesive is perfect for use in the assembly of temperature sensitive electronic components. It has good flow performance, excellent adhesion, and is formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. This means you can make any necessary adjustments to the final device configuration before committing it to full cure.
Leer más
Documentos y Descargas
¿Está buscando un TDS o SDS en otro idioma?
Información técnica
| Coeficiente de dilatación térmica (CDT) | 56.0 ppm/°C |
| Coeficiente de dilatación térmica (CDT), Above Tg | 183.0 ppm/°C |
| Módulo de almacenaje | 3.0 GPa |
| Temperatura de transición vítrea (Tg) | 95.0 °C |
| Tipo de curado | Curado térmico y por UV |
| Viscosidad, Shear Rate 10 s⁻¹ | 35000.0 mPa.s (cP) |
| Índice tixotrópico | 2.4 |
LOCTITE® ABLESTIK NCA 2380
This epoxy electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.