LOCTITE® ABLESTIK NCA 2380

Características e Benefícios

This epoxy electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.
LOCTITE® ABLESTIK NCA 2380 dual cure adhesive is perfect for use in the assembly of temperature sensitive electronic components. It has good flow performance, excellent adhesion, and is formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. This means you can make any necessary adjustments to the final device configuration before committing it to full cure.
Ler mais

Informação Técnica

Coeficiente de expansão térmica (CTE) 56.0 ppm/°C
Coeficiente de expansão térmica (CTE), Above Tg 183.0 ppm/°C
Modulo de armazenamento 3.0 GPa
Temperatura de transição do vidro (Tg) 95.0 °C
Tipo de cura Cura UV + Calor
Viscosidade, Shear Rate 10 s⁻¹ 35000.0 mPa.s (cP)
Índice tixotrópico 2.4