LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Savybės ir privalumai
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Aprašymas
Dokumentai ir atsisiuntimai
Jūsų vietovėje jūsų kalba nėra jokių galimų dokumentų ir atsisiuntimų. Galite ieškoti dokumento kita kalba
Papildomi dokumentai
Techniniai duomenys
Bangos ilgis, Item #2183339 | 380.0 nm |
Bangos ilgis, Item #2183340 | 405.0 nm |
Lemputės tipas, Rekomenduojama | LED |
Naudojamas dozuoti | UV spinduliais ir matoma šviesa kietinamiems klijams |
Pritaikomumas | Taškinis LED kietinimas |
Veikimo tipas | UV Vis |
Šviesos intensyvumas, For 380nm source | 1.0 - 18.0 W/cm² |
Šviesos intensyvumas, For 405nm source | 1.0 - 27.0 W/cm² |