Henkel Converters’ Academy Europe

Certified training in the adhesive lamination process.

The Converters’ Academy from Henkel is an ongoing, topic specific professional training program that benefits the entire value chain. Material suppliers, converters and consumer goods manufacturers receive knowledge related to flexible packaging.

The training course

Since 2009 Henkel is offering the training course “Specialist in Laminating Techniques for Flexible Packaging (CCI)”. In cooperation with the IHK Düsseldorf (Chamber of Commerce and Industry), this Converters’ Academy training course thoroughly qualifies an operator in the area of adhesive laminations.

Next courses:

Henkel Converters’ Academy in English language:
1st Week: January 27 – 31, 2025, 2nd Week: March 10 – 14, 2025

Henkel Converters’ Academy in German language:
1st Week: October 27 – 31, 2025, 2nd Week: November 24 – 28, 2025

If you are interested, please contact us via the contact form below.

What is the training all about?

The class consists of a two week comprehensive course (one week at a time, 4 to 6 weeks apart) in dealing with lamination for of flexible packaging. Most mornings include theoretical teachings from Henkel experts. In the afternoons participants will do hands-on training in the technical service center.

How will you learn?

As mistakes are actually one foundation for learning, the practical training will use machines from Henkel to demonstrate the most common mistakes and offer corrective solutions. These practical exercises are always conducted in small groups, with an assigned mentor to ensure that learning objectives are achieved. At the end of the course, each student will receive the course manual, containing all presentations.

Studies have shown that people learn best not from reading or from watching, but from actually doing. The concept of Henkel Converters’ Academy is based on this approach.

Week 1:

Why laminations are made (Flexible packaging versus other types of packages, different substrates offer different features)
Substrates (Manufacturing, properties, types)
Adhesives (technologies: Solvent-based and solvent-free; handling: mixing, data sheet review etc.)
Dosing units (Basics, cautions, important operating instructions)
Curing (Conditions and challenges)
Test methods (Bond strength, seal strength)
Failure mode analysis (Batch card, laminating with different solids, on/off ratio)
Troubleshooting
Practical training

Week 2:

Machine parameters and how they influence the lamination
Web handling (Interaction between films and rollers, web tension, winding)
Rollers (Different roller types)
Rolling, curling and other web defects (Solutions and preventions)
Optics (Wetting, orange peel, wrinkling, solution and preventions)
Practical training
IHK (CCI) Certificate Test

The training course “Specialist in Lamination Techniques for Flexible packaging” has been developed in cooperation with the IHK Düsseldorf (Chamber of Commerce and Industry). It is designed for those directly involved in the creation of flexible packaging materials:

Our participants include:

Operators
Quality control personnel
Project engineers
Process engineers
Manufacturing supervisors

From this Converters’ Academy course, companies will benefit through the knowledge gained by the students they employ.

Why is IHK (CCI) Düsseldorf involved?

The IHK Düsseldorf (Chamber of Commerce and Industry) is widely recognized and respected for its certification programs. This reputation for outstanding programs in further education is known not only in Germany, but also in other European countries. Once you are certified as “Specialist in Lamination Techniques for Flexible Packaging”, it is ensured that you will have an excellent foundation of knowledge. This certification will enhance your reputation for your customers, as employees will receive an economical outsourcing of training that will enable them to document their high level of expertise.

The IHK (CCI) test takes place at the end of the second week.

Bastian Münich
Rolf Bayer Vacuumverpackungen GmbH

“I have been working in “lamination” and Flexible Packaging for 25 years. I participated in this course to gain more and deeper knowledge. The lessons are clear and close to the practical life. Many tips and suggestions that I will put to life in my company. We learnt a lot here, that I would never get to know in my everyday work. And you are a really nice and friendly team. During these two weeks I was in good hands and have learnt a lot. Thank you!”

Sandra Manowski
Südpack Medica AG

“I wanted to deepen and intensify my knowledge on lamination. My future tasks in medical applications will mainly deal with converting, so this seminar was perfect choice for me. All teachers are very open-minded and share their knowledge and experience with dedication, being able to answer each and every question. Troubleshooting is a big part of the course, which is especially important to me, same as the concrete examples. I would have liked to go through all different lamination types in real life, but of course, there was no time for this. We received detailed handouts and documentation. Thank you for this interesting seminar and the open-mindedness of everyone involved.”

Sascha Berger
Siegwerk Druckfarben AG & Co. KGaA

“Siegwerk has a long history of co-operation with Henkel. I wanted to verify and extend my own knowledge and gain new insights. Contents are taught in a casual, yet professional manner, easy to understand and always with a focus on the students. All teachers are absolutely proved and perform at their best. Even inexperienced students do not get lost in the many technical topics. Experienced persons like me can learn a lot and profit from the detailed explanations and insights. The entire course was perfectly organized and never boring! Henkel offers a good infrastructure and more than perfect conditions for a training in the classroom and on the machines. The stay in the close by hotel made it round. Thank you very much!”

Karl Bruder
O. Kleiner AG

“I have been working in “lamination” and flexible Packaging since only one month! My new boss has suggested the course to get a quick start into my new work life. I would recommend this course to my colleagues because there is a huge knowledge transfer during these two weeks. On top, getting to know new people from Henkel and other companies is interesting. For me, as a complete newcomer, it was difficult to follow in the first week, having no experience at all in this field. For a smoother start, it would have been better to work some months in lamination first. On the other hand, this course saved me at least 6 months of learning “on the job” due to the condensed and structured knowledge transfer.”

The tuition fee for a two-week Henkel Converters’ Academy Training course is 4,500 € (plus VAT), payable in full prior to the first session.

Included in the tuition are:

Over 80 hours of classroom instruction and hands-on laminator training
Comprehensive reference manual
CCI exam monitored by the CCI (held on Friday of the second week)
CCI Certificate "Specialist in Lamination Techniques for Flexible Packaging (CCI)" (awarded after passing the CCI exam)
Lunches, dinners

Participants are asked to bring:

Safety shoes
Safety goggles
Casual wear suited for working with the laminator

Outsource your training to the experts
Henkel Converters’ Academy provides companies with an economical opportunity to outsource their training. You gain the full benefit of our expertise and experience in the field of adhesives, lamination and flexible packaging – at a fraction of the cost of in-house training measures.

Payment conditions
The attendance fee is to be paid on invoice receipt prior to commencement of the event. Henkel reserves the right to exclude participants if their fee has not been paid in advance. Cancellation is free of charge up to 14 days before the event. Within 13 days before the event, 50% of the costs will be charged. There will be no fee refund for a no-show or cancellation on the date of the event. Henkel will be glad to accept replacement participants without additional charge.

Contact us

Please fill out the form below and we’ll respond shortly.

There are some errors, please correct them below.

What would you like to request?

Quote

TDS

SDS

Other

This field is required

Request details

This field is required

First Name

This field is required

Last Name

This field is required

Company (Optional)

Postcode

This field is required

This field is required.

Please enter a valid email address.

Phone (Optional)

Leave empty if you are not a bot.:

Henkel Converters’ Academy Europe

The Converters’ Academy from Henkel is an ongoing, topic specific professional training program that benefits the entire value chain. Material suppliers, converters and consumer goods manufacturers receive knowledge related to flexible packaging.

Henkel Converters’ Academy’s program of study

IHK (CCI) Certificate in Lamination Techniques

Customer References

Conditions and Costs

Contact us