LOCTITE® 402 Instant Adhesive

Features and Benefits

LOCTITE 402 is a medium viscosity, high temperature, durable, and fast-setting instant adhesive ideal for a wide range of substrates.
LOCTITE® 402 is an ultra-performing, fast-setting instant adhesive that provides reliable performance under extreme operating temperatures up to 135°C. LOCTITE 402 cures quickly and creates strong, durable bonds to a wide range of plastic, rubber, and metal substrates – including difficult-to-bond materials. LOCTITE 402 is ideally suited for the joining of small parts in high-speed production applications as well as quick, on-the-go repairs.
  • Ultra-performance adhesive
  • Tested to Henkel's ISO-10993 biocompatibility protocols
  • Temperature resistance up to 135°C
  • Unique, patented formula with reduced hazardous ingredients
  • Perfect for quick repairs as well as high speed production applications
Read More

Technical Information

Application method Dispense System, Manual
Applications High Speed Production Bonding, Repairing
Color Clear
Cure type Moisture Cure
Fixture time, Steel (grit blasted) 20.0 sec.
Gap fill 0.15 mm
Key characteristics Fast Setting, For Difficult-to-Bond Materials, Temperature Resistant
Operating temperature -40.0 - 135.0 °C
Physical form Liquid
Recommended for use with Elastomer, Metal, Plastic, Porous Surface
Shear strength, Mild Steel (grit blasted) >15.0 N/mm² (2100.0 psi )
Viscosity 110.0 mPa·s (cP)

How to

Step by Step Guide

1. Preparation - Cleaning

It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063) to degrease and clean surfaces prior to applying the adhesive.

2. Preparation - Priming

To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 7239 or LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.

3. Preparation - Activation

If cure speed is too slow, use appropriate activator LOCTITE® SF 7458 or LOCTITE® SF 7455. Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.

4. Application

Apply adhesive onto one side/part.

5. Assembly

Apply adhesive onto one side and assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7458 or LOCTITE® SF 7455/7452. Spray or drop activator onto excess product.

Equipment

For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.

Frequently Asked Questions