LOCTITE® HY 4070
Features and Benefits
Available sizes:
LOCTITE HY 4070 is a 2-component, fast fixturing, cyanoacrylate/acrylic hybrid adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. HY 4070 is ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).
- Fast fixturing
- Moisture resistant
- Temperature resistance from -40 to +100°C
- Gap filling up to 0.2 in (5 mm)
- Gel consistency prevents adhesive flow, even on vertical surfaces.
- Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals
- Viscoelastic & Finite Strain FEA data cards available
Documents and Downloads
Safety Data Sheets and RoHs
- Twin Syringe 10.0/case - IDH 2264448
LOCTITE® HY 4070, 11 g Twin Syringe 2264448 en-CA
IDH:
2264448
EAN:
079340011717
Size Case: Twin Syringe
Quantity: 10.0/case
No documents found
Looking for a TDS or SDS in another language?
Additional Documents
Technical Information
| Application method | Dispense system |
| Applications | Bonding dissimilar materials, Bonding plastic, Bonding rubber, Construction, Direct bonding, Edge bonding, Interior repairs, Structural bonding |
| Cure type | Room temperature (ambient) cure, Two component mix |
| FEA (finite element analysis) | Finite strain, Viscoelastic |
| Fixture time, Aluminum (etched) 0.5mm gap | <60.0 sec. |
| Gap fill | 5.0 mm |
| Mix ratio, by volume | 10 : 1 |
| Number of components | 2 part |
| Physical form | Gel |
| Recommended for use with | Composite, Composite: advanced composites, Dry surface, Elastomer: highly filled elastomer, Epoxy, Fiberboard, Gel coat, Laminate, Metal, Non-gel coat, Painted surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: cast urethane, Vinyl, Wood |
| Shear strength, Steel (grit blasted) | 25.0 N/mm² (3625.0 psi ) |
| Mixed | |
| Key characteristics, Mixed | Cure speed: ultra fast cure, Gap filling, Moisture resistant, Multipurpose |
| Operating temperature, Mixed | -40.0 - 100.0 °C (-40.0 - 212.0 °F ) |
| Resin | |
| Casson viscosity, cone & plate, Resin @ 25.0 °C | 200.0 - 1300.0 mPa·s (cP) |
| Color, Resin | Yellow |
| Hardener | |
| Color, Hardener | Clear |
| Viscosity, cone & plate, Hardener @ 25.0 °C Shear Rate 1,000 s⁻¹ | 1.0 - 30.0 mPa·s (cP) |
LOCTITE® HY 4070
LOCTITE HY 4070 is a 2-component, fast fixturing, cyanoacrylate/acrylic hybrid adhesive that works well on various substrates including most plastics, rubbers and metals.