LOCTITE® FREKOTE® 55-NC - Aerosol Can 12.0/case
Features and Benefits
Available sizes:
A 1-part, clear, solvent-based, moisture-cured, semi-permanent polymer mold release agent with reduced odor, for a satin matt finish.
LOCTITE® FREKOTE® 55NC is a clear, solvent-based, moisture-cured, semi-permanent release polymer with reduced odor versus previous generation release agents. Specially designed to provide multiple release of advanced composites, FRP polyester parts and rotationally molded parts with no contaminating transfer or mold build-up, it can be wiped or sprayed on. Typical dry time between coats is just 5 minutes, and it creates a satin matt finish.
- No mold build-up
- For advanced composites, FRP & rotationally molded parts
- No contaminating transfer
- Satin matt finish
- Manual or spray application
Documents and Downloads
Safety Data Sheets and RoHs
- Aerosol Can 12.0/case - IDH 398487
- Barrel 1.0/case - IDH 420412
- Can 4.0/case - IDH 420414
LOCTITE® FREKOTE® 55-NC, 9.6 oz Aerosol Can 398487 en-CA
IDH:
398487
EAN:
079340834446
Size Case: Aerosol Can
Quantity: 12.0/case
LOCTITE® FREKOTE® 55-NC, 208 l Barrel 420412 en-CA
IDH:
420412
EAN:
079340834415
Size Case: Barrel
Quantity: 1.0/case
LOCTITE® FREKOTE® 55-NC, 1 gal Can 420414 en-CA
IDH:
420414
EAN:
079340834439
Size Case: Can
Quantity: 4.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Drying time between coats, @ 20.0 °C | 5.0 min. |
| Finish reflection | Matte, Satin |
| Full cure time, @ 20.0 °C | 30.0 min. |
| Key characteristics | Solvent based |
| Recommended for use with | Composite: advanced composites, Fiberglass reinforced plastic (FRP) |
LOCTITE® FREKOTE® 55-NC
A 1-part, clear, solvent-based, moisture-cured, semi-permanent polymer mold release agent with reduced odor, for a satin matt finish.