LOCTITE® 495
Features and Benefits
Available sizes:
A general purpose, low-viscosity instant adhesive for fast fixturing and bonding of a wide range of materials.
LOCTITE® 495 is a transparent, colorless, low viscosity, general purpose instant adhesive offering fast fixturing. It is able to bond a wide range of materials, including plastics, rubbers and metals. It can also bond polyolefins when used in combination with LOCTITE® SF 770 primer.
- General purpose colorless and transparent bonding
- Low viscosity for thin bond lines
- Ideal for quick repairs
- Reduced hazardous ingredients for improved occupational safety
Documents and Downloads
Safety Data Sheets and RoHs
- Bottle 10.0/case - IDH 135467
- Bottle 10.0/case - IDH 209591
- Tube 10.0/case - IDH 234072
LOCTITE® 495, 1 lb Bottle 209591 en-CA
IDH:
209591
EAN:
079340495616
Size Case: Bottle
Quantity: 10.0/case
LOCTITE® 495, 3 g Tube 234072 en-CA
IDH:
234072
EAN:
079340495043
Size Case: Tube
Quantity: 10.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense system, Manual |
| Applications | Bonding plastic, Bonding rubber, Repairing |
| Color | Clear |
| Cure type | Moisture cure |
| Fixture time, Steel | 5.0 sec. |
| Gap fill | 0.12 mm |
| Key characteristics | General purpose, Viscosity: low viscosity, fixture: very fast fixture |
| Operating temperature | -40.0 - 120.0 °C (-40.0 - 250.0 °F ) |
| Physical form | Liquid |
| Recommended for use with | Elastomer, Metal, Plastic, Porous surface |
| Shear strength, Mild Steel (grit blasted) | 14.2 N/mm² (2060.0 psi ) |
| Viscosity | 40.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063 or SF 7070) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use appropriate activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452. Spray or drop activator onto excess product.
Equipment
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.
Frequently Asked Questions
What does “non-HQ formula” mean?
Why does my plastic crack when I use an instant adhesive?
Why is there a white haze on my parts around the bond area?
Do instant adhesives need to be refrigerated?
LOCTITE® 495
A general purpose, low-viscosity instant adhesive for fast fixturing and bonding of a wide range of materials.