LOCTITE® 515 - Standard Cartridge 10.0/case
Features and Benefits
Available sizes:
This anaerobic-curing flange sealant for rigid machined metal flanges fills gaps up to 0.25 mm (0.01") and typically provides a 30-minute fixture time.
LOCTITE® 515 is a form-in-place anaerobic-curing flange sealant that cures when confined in the absence of air between close fitting metal surfaces. It seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements. It provides resistance to low pressures immediately after assembly of flanges, and is typically used as a form-in-place gasket for pumps, thermostats, compressors, transmission housings, and axle covers. The product is fluorescent under UV light, allowing visual inspection of the bead.
- For machined metal components
- Forms a perfect seal
- Gap fill up to 0.25 mm (0.01")
- Form-in-place sealant
- Fluorescent under UV for quality control
Documents and Downloads
Safety Data Sheets and RoHs
- Tube 10.0/case - IDH 135479
- Tube 10.0/case - IDH 209756
- Tube 6.0/case - IDH 544422
- Standard Cartridge 10.0/case - IDH 88541
LOCTITE® 515, 50 ml Tube 135479 en-CA
IDH:
135479
EAN:
079340515314
Size Case: Tube
Quantity: 10.0/case
Download SDS
Download RoHs
LOCTITE® 515, 6 ml Tube 209756 en-CA
IDH:
209756
EAN:
079340515178
Size Case: Tube
Quantity: 10.0/case
LOCTITE® 515, 50 ml Tube 544422 en-CA
IDH:
544422
EAN:
079340386259
Size Case: Tube
Quantity: 6.0/case
Download SDS
Download RoHs
LOCTITE® 515, 300 ml Standard Cartridge 88541 en-CA
IDH:
88541
EAN:
079340515802
Size Case: Standard Cartridge
Quantity: 10.0/case
Download SDS
Download RoHs
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense system, Manual |
| Applications | Rigid assembly gasketing, Sealing |
| Chemical basis / base | Methacrylate |
| Color | Purple |
| Cure type | Anaerobic cure |
| Fixture time | 30.0 min. |
| Gap fill | 0.25 mm |
| Key characteristics | Fluorescent, For machined, rigid flanges, Strength: medium strength, Thixotropic |
| Lap shear strength | 6.0 N/mm² |
| Number of components | 1 part |
| Physical form | Gel |
| Recommended for use with | Metal: aluminium, Metal: steel |
| Storage temperature | 8.0 - 21.0 °C |
| Viscosity, Brookfield - HBT, @ 25.0 °C Spindle TB, speed 0.5 rpm, Helipath | 700000.0 - 1700000.0 mPa·s (cP) |
| Viscosity, Brookfield - HBT, @ 25.0 °C Spindle TB, speed 5.0 rpm, Helipath | 150000.0 - 375000.0 mPa·s (cP) |
If you are using LOCTITE® 515 you might be interested in
LOCTITE® 515
This anaerobic-curing flange sealant for rigid machined metal flanges fills gaps up to 0.25 mm (0.01") and typically provides a 30-minute fixture time.