LOCTITE® 609

Features and Benefits

Available sizes:

This high strength, general purpose, anaerobic-curing retaining compound is designed for bonding cylindrical fitting parts. Mil spec.
To lock bushings and sleeves in housings on shafts, augment press fits, or to bond any close-fitting cylindrical parts, LOCTITE® 609 is a good choice. The green, high strength, anaerobic-curing retaining compound cures in the absence of air between close fitting metal surfaces, providing a high strength and corrosion-free bond. Typical applications include rotor to shafts in fractional and subfractional horsepower motors.
  • Low viscosity
  • Augments press fits
  • Fluorescent under UV for quality control
  • Meets Mil Spec: Mil-R-46082B (a regional approval)
  • Operating temperature: -55°C to 150°C (-65°F to 300°F)
Read More

Documents and Downloads

Safety Data Sheets and RoHs
No documents found

Technical Information

Agency approvals / certificates / specifications ASTM D5363, MIL-R-46082B for existing designs
Application method Dispense gun, Dispense system, Manual
Applications For close fitting cylindrical parts, Retaining
Color Green
Cure type Anaerobic cure
Fixture time 10.0 min.
Gap fill 0.15 mm
Key characteristics Fluorescent, Shear strength: high shear Strength, Viscosity: low viscosity
Operating temperature -65.0 - 300.0 °F (-55.0 - 150.0 °C )
Physical form Liquid
Recommended for use with Metal
Shear strength, Steel 2300.0 psi (15.0 N/mm² )
Specific gravity, @ 25.0 °C 1.1
Viscosity 120.0 mPa·s (cP)