LOCTITE ABLESTIK NCA 2200
fitur dan keuntungan
LOCTITE ABLESTIK NCA 2200, Acrylated Epoxy, Dual Cure, Assembly
LOCTITE® ABLESTIK NCA 2200 dual cure adhesive is designed for use in the assembly of temperature sensitive electronic components This product is formulated to temporarily cure when exposed to UV light, followed with a secondary thermal cure at low temperature. Temporarily curing the material allows for any necessary adjustments to the final device configuration.
- Dual cure system
- Low viscosity
- Non-conductive
- Fast cure at low temperature
- Good adhesion to a variety of substrates
Dokumen dan Unduhan
Mencari TDS atau SDS dalam bahasa lain?
Informasi Teknis
| Formulir Fisik | Cair |
| Indeks Tiksotropik | 2.0 |
| Intensitas Cahaya Jadwal Pengerasan | 100.0 mW/cm² |
| Jadwal Pengerasan, Disarankan | 2.0 sec. |
| Kekentalan, Cone & Plate, Cone 20 mm, Angle 2° @ 25.0 °C Shear Rate 20 s⁻¹ | 22000.0 mPa.s (cP) |
| Nomor Komponen | 1 Part |
| Substrat | Ceramic |
| Suhu Penyimpanan | -20.0 °C |
| Tipe Pengeringan | Heat + UV Cure |
LOCTITE ABLESTIK NCA 2200
LOCTITE ABLESTIK NCA 2200, Acrylated Epoxy, Dual Cure, Assembly