LOCTITE ABLESTIK ICP 9000

Name: LOCTITE ABLESTIK ICP 9000
Brand: LOCTITE

fitur dan keuntungan

LOCTITE ABLESTIK ICP 9000 is a single component, silver-filled, semi-sintering liquid adhesive that is a solder replacement and specially designed for use in high power and high temperature assembly of electronic devices.

LOCTITE® ABLESTIK ICP 9000 is an electrically conductive material that offers high adhesion and low stress for high end power IC packages including, SiC power devices as well as GaAs and GaN die transistors. This product is formulated to offer good workability and no resin bleed-out, as well as high thermal stability. LOCTITE ABLESTIK ICP 9000 is highly reliable and the thermal performance is comparable to solder paste products.

Electrically conductive
No resin bleed-out
Good workability and sintering properties when used on Ag, PPF, Au and Cu substrates
High thermal stability

Baca selengkapnya

Dokumen dan Unduhan

Unduh TDS

Mencari TDS atau SDS dalam bahasa lain?

Pencarian TDS dalam bahasa lainnya

Pencarian SDS dalam bahasa lainnya

Informasi Teknis

Jadwal Pengerasan, @ 200.0 °C	1.0 hr.
Jenis Filler	Abu-Abu: Perak
Tipe Pengeringan	Heat Cure
Warna	Abu-Abu: Perak

Pertanyaan Umum

Do not try to reduce the thawing time by rubbing the syringes between the hands or by use of any type of heating device. When ready to use the ECA, transfer the needed syringes from the syringe box in the freezer to a designated thaw area using thermal gloves. While frozen, only handle the syringe by the flanges located at the top end of the syringe. This will minimize thermal shock and reduce the likelihood of FTVs from forming. During thaw, the syringes should be stored in the vertical position. Thaw times vary depending on syringe size but are typically >1 hour.

To maximize adhesive performance, a clean substrate is required. Industry standard cleaning methods include solvent cleaning, mechanical abrasion / cleaning or chemical treatment.

There are many methods to dispense: auger pump, jet pump, time/ pressure. This is equipment and application specific, please check with your equipment vendor for their recommendations. The simplest approach that Henkel recommends is time/ pressure.

LOCTITE ABLESTIK ICP 9000

fitur dan keuntungan

Dokumen dan Unduhan

Mencari TDS atau SDS dalam bahasa lain?

Informasi Teknis

Pertanyaan Umum

Is there anything that can be done to speed up the thawing of a syringe?

Do I need to have a clean substrate surface prior to adhesive assembly?

What is the preferred method to automatically dispense ECA's?