LOCTITE ABLESTIK 84-1LMINB

Do not try to reduce the thawing time by rubbing the syringes between the hands or by use of any type of heating device. When ready to use the ECA, transfer the needed syringes from the syringe box in the freezer to a designated thaw area using thermal gloves. While frozen, only handle the syringe by the flanges located at the top end of the syringe. This will minimize thermal shock and reduce the likelihood of FTVs from forming. During thaw, the syringes should be stored in the vertical position. Thaw times vary depending on syringe size but are typically >1 hour.

To maximize adhesive performance, a clean substrate is required. Industry standard cleaning methods include solvent cleaning, mechanical abrasion / cleaning or chemical treatment.

There are many methods to dispense: auger pump, jet pump, time/ pressure. This is equipment and application specific, please check with your equipment vendor for their recommendations. The simplest approach that Henkel recommends is time/ pressure.