Shuttle Tables - WT 1-LEVEL and WT 2-LEVEL

Modular Rxtension and Continuous Work in Shuttle Operation

The shuttle and sliding table concept enable the continuous processing of the parts by two pick-up plates in shuttle mode. These are located next to each other on one level in the case of WT 1-LEVEL or above each other on two levels in the case of WT 2-LEVEL. The insertion area for the components is clearly and safely separated from the traversing area of the CNC robots. The shuttle tables have a stable aluminum base frame with leveling feet. The aluminum pick-up plates are prepared with a hole pattern for attaching the workpieces or workpiece fixtures.

Shuttle Table WT 1-LEVEL

Two pick-up plates in shuttle mode side by side on one level

Work surfaces side by side, dimensions of the respective work surface (see table of variants for the WT 1-LEVEL)

Variants WT 1-LEVEL

Work surfaces side by side, dimensions of the respective work surface (length x breadth in mm):

Dimensions work surface sliding table			Dimensions linear robot
Width (B)	Length (L)	Stroke (H)	Working height (AH)	X-Axis	Y-Axis
450	1,000	1,500	950	1,000	1,000
950	1,000	1,500	950	2,000	1,000
1,200	1,000	1,500	950	2,500	1,000

Special sizes can be produced on request.

Shuttle Table WT 2-LEVEL

Two pick-up plates in shuttle mode, one above the other on two planes

Work surfaces side by side, dimensions of the respective work surface (see table of variants for the WT 2-LEVEL)

Variants WT 2-LEVEL

Work surfaces side by side, dimensions of the respective work surface (length x breadth in mm):

Dimensions sliding table / work surface							Dimensions linear robot
Tabletop – top			Tabletop – bottom			Stroke (H)	X-Axis	Y-Axis
BT1	BA1	L	BT2	BA2	L	Stroke (H)	X-Axis	Y-Axis
1,600	2,200	1,000	1,600	1,700	1,000	1,500	2,000	1,000
2,100	2,700	1,000	2,100	2,200	1,000	1,500	2,500	1,000
2,400	3,000	1,000	2,400	2,500	1,000	1,500	3,000	1,000

Special sizes can be produced on request.

Technical Data

Pneumatic drive of the shuttle talbe plates with end position monitoring
Compressed air consumption: 120 l/min at approx. 6 bar

Contact Us

Please fill out the form below and we'll respond shortly

There are some errors, please correct them below

What would you like to request?

Technical Request

TDS

SDS

Other

This field is required

Request details

This field is required

First Name

This field is required

Last Name

This field is required

Company Name (Optional)

Postcode (Optional)

This field is required

This field is invalid

Phone (Optional)

Leave empty if you are not a bot: