LOCTITE® FREKOTE 770-NC
Features and Benefits
Available sizes:
Clear, solvent-based, moisture-cured, epoxy mould release agent for advanced composites and FRP polyester parts.
LOCTITE® FREKOTE 770-NC is a clear, solvent-based, moisture-cured, epoxy mold release agent for advanced composites and FRP polyester parts. It is a versatile, semi-permanent release agent with high thermal stability that provides high slip where mold geometry problems are encountered. Wiped or sprayed on, it creates a high gloss finish; dry time between coats is just 5 - 10 min.
- High slip compensates for mould geometry problems
- Universal for advanced composites
- Also for FRP polyester parts
- High gloss finish
- Fast curing
Documents and Downloads
Safety Data Sheets and RoHs
- Aerosol Can 12.0/case - IDH 398489
- Can 4.0/case - IDH 416032
- Barrel 1.0/case - IDH 420422
- Pail 1.0/case - IDH 420423
LOCTITE FREKOTE 770NC, 9.6oz 398489 en-CA
IDH:
398489
EAN:
079340834699
Size Case: Aerosol Can
Quantity: 12.0/case
LOCTITE FREKOTE 770NC, 1gal 416032 en-CA
IDH:
416032
EAN:
079340834682
Size Case: Can
Quantity: 4.0/case
LOCTITE FREKOTE 770NC, 55gal 420422 en-CA
IDH:
420422
EAN:
079340834668
Size Case: Barrel
Quantity: 1.0/case
LOCTITE FREKOTE 770NC, 5gal 420423 en-CA
IDH:
420423
EAN:
079340834675
Size Case: Pail
Quantity: 1.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Drying time between coats, @ 20.0 °C | 5.0 min. |
| Finish reflection | Gloss: high gloss |
| Full cure time, @ 20.0 °C | 10.0 min. |
| Key characteristics | Solvent based |
| Recommended for use with | Composite: advanced composites, Fiberglass reinforced plastic (FRP) |
LOCTITE® FREKOTE 770-NC
Clear, solvent-based, moisture-cured, epoxy mould release agent for advanced composites and FRP polyester parts.