LOCTITE 222MS Purple Low Strength Threadlocker
Known as LOCTITE 222MS Purple Threadlocker Low Strength/Small Screw MIL SPEC
Features and Benefits
Documents and Downloads
- 10 ml Bottle 10.0/case - IDH 135333
- 50 ml Bottle 10.0/case - IDH 135334
- 250 ml Bottle 10.0/case - IDH 135335
- 0.50 ml Tube 100.0/case - IDH 231483
Size Case: 250 ml Bottle
Looking for a TDS or SDS in another language?
|Breakaway Torque, M10 Steel Nuts/Bolts||6.0 N·m (53.0 in./lb. )|
|Fixture Time||20.0 min.|
|Key Characteristics||General Purpose, Strength: Low Strength, Thixotropic|
|Operating Temperature||-55.0 - 150.0 °C (-65.0 - 300.0 °F )|
|Prevail Torque, M10 Steel Nuts/Bolts||4.0 N·m (30.0 in./lb. )|
|Viscosity, @ 25.0 - 77.0 Speed 20 rpm||1200.0 mPa·s (cP)|
Step by Step Guide
It is recommended to use LOCTITE SF 7070 to degrease and clean surfaces prior to applying threadlocker.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
3a. Application - Through Hole
Apply a few drops of liquid threadlocker to the thread engagement area. Assemble nut and tighten to proper torque.
3b. Application - Blind Hole
Apply several drops of liquid threadlocker into lower third of blind hole, as well as a few drops onto male threads, and then install male threads. Tighten to proper torque.
Assemble and tighten to proper torque requirement. If several screws/small bolts are being assembled, torque them down to the correct value within the fixture time window.
Disassemble with standard hand tools.
Where to Buy
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.Go To distributor locator