Threadlockers
Purple, low-strength threadlocker for small fasteners
Low-strength threadlocker for the locking and sealing of small fasteners under 6.35 mm (1/4") in diameter. Prevents loosening from shock and vibration, removable with hand tools.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
Size Please make your selection 10 ml
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
Order request{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}}
- Description
- Technical specification
If you’re working with small diameter screws made of low strength metals (e.g., aluminum or brass), try LOCTITE® 222. It is ideal for low-strength threadlocking of adjustment screws, countersunk head screws, and set screws; on collars, pulleys, tool holders and controllers. It works on most metals without primer, including passive substrates such as stainless steel, aluminum and plated surfaces. It also cures through light coatings of corrosion prevention oils without having to clean the parts.
-
Ideal for low-strength threadlocking of adjustment screws, countersunk head screws and set screws
-
Prevents fastener loosening on vibrating assemblies, e.g. pumps, gear boxes, presses
-
Ideal for small thread sizes up to 6.35 mm (1/4")
-
Can be disassembled with ordinary hand tools for easy service & maintenance
-
NSF P1 Reg. No. 123001
Agency approvals / certificates / specifications:
NSF P1 Reg. No 123002
Application method:
Dispense system,Manual
Application temperature:
-55.0 °C - 150.0 °C (-65.0 °F - 300.0 °F)
Applications:
Threadlocking
Breakaway torque, M10 Steel Nuts/Bolts:
6.0 N·m (50.0 in./lb.)
Color:
Purple
Cure type:
Anaerobic cure
Fixture time:
20.0 min.
Key characteristics:
Disassembly: removable,Fluorescent,General purpose,Mix: no mix required,Strength: low Strength,Thixotropic
Physical form:
Liquid
Prevail torque, M10 Steel Nuts/Bolts:
4.0 N·m (35.0 in./lb.)
Recommended for use with:
Metal,Metal: passive metal
Viscosity, Speed 20 RPM, 25.0 (77.0 ):
1200.0 mPa·s (cP)
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} {{/distributor.anyInStock}}In stock {{#distributor.notInStock}} {{/distributor.notInStock}}Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
Order request{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}}
