Thread sealants
General purpose thread sealant for metal pipes and fittings
Medium strength, thixotropic, general purpose thread sealant for straight-to-straight and straight-to-taper threaded fittings. Fills the space between threaded parts and seals and locks at the same time.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
Size Please make your selection 50 ml
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} In stock {{#distributor.notInStock}} Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
Order request{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}}
{{/distributor.isExpanded}}
{{^distributor.isExpanded}}
{{/distributor.isExpanded}}
{{/distributor.isVisible}}
{{/data}}
- Description
- Technical specification
When you need a general purpose thread sealant with high temperature- and contamination-tolerance, as well as effectiveness on inactive as well as active metals, choose LOCTITE® 577. Designed for the locking and sealing of threaded metal pipes and fittings, this product provides an instant, low-pressure seal and won't creep, shrink or shred. Perfect for use on stainless steel without the need for surface activation, it offers gap performance to 0.01in and will cure even in the presence of minor surface contaminations from cutting, lubrication, anti-corrosion and protection fluids, or cleaners containing surfactants and corrosion inhibitors.
-
Excellent chemical resistance
-
Thixotropic for ease of application
-
Medium strength for ease of disassembly
-
Cures on active and inactive metals
-
Registered to NSF Category P1
-
DVGW Approval (EN 751-1): DVGW Reg. No. NG-5146CQ0312
Agency approvals / certificates / specifications:
DVGW,NSF,WRAS
Application method:
Dispense system,Manual
Applications:
Pipe sealing,Thread sealing
Breakaway torque, Steel, M10:
33.0 N·m (295.0 in./lb.)
Color:
Yellow
Cure type:
Anaerobic cure
Key characteristics:
Chemical resistant,Fluorescent,General purpose,Immediate low pressure sealing,Strength: medium strength,Surface contamination-tolerant,Temperature: high temperature,Thixotropic
Operating temperature:
-55.0 °C - 150.0 °C (-65.0 °F - 300.0 °F)
Physical form:
Paste
Recommended for use with:
Metal,Metal: passive metal,Thread type: tapered
Viscosity, 20 RPM:
25000.0 mPa·s
How to use
Cleaning - It is recommended to use LOCTITE® SF 7070 Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive.
Activation - If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
Apply a 360° bead to the leading male thread, leaving the first thread free. For bigger threads, apply both on male and female threads.
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F/260°C; disassemble parts while hot. For corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.
FAQ
The standard continuous operating temperature range for LOCTITE® anaerobic adhesives is -65° to +300°F (-55°C to +150°C). Depending on the specific application requirements, high-performance grades are also available offering increased temperature resistance. Please consult with the Henkel technical team for availability and grade selection.
Yes, Henkel anaerobic adhesives become highly resistant thermoset polymers once cured, making them suitable for a vast number of applications. Many Henkel silicone adhesives offer excellent resistance to standard media like water/glycol, amongst other solutions. Consult our online product resources or contact our technical teams for further information.
All adhesives are compatible with metal substrates although bond strength and durability will vary depending on the technology selected. Anaerobic adhesives may cause stress-cracking in some sensitive polymers and therefore should generally be avoided on plastic parts. Consult Henkel technical teams for further advice as needed.
All necessary H&S measures and PPE (personal protection equipment) requirements can be found on the product material safety data sheet, all of which are available via our website.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
{{#distributor.onShelf}} {{#distributor.withSpecialPrice}} {{distributor.prices.specialWithSymbol}}
{{distributor.prices.regularWithSymbol}}
{{#distributor.withoutSpecialPrice}} {{distributor.prices.regularWithSymbol}}
{{#distributor.anyInStock}} In stock {{#distributor.notInStock}} Out of stock {{#distributor.notOnShelf}} {{^distributor.notInStock}} {{#distributor.onShelf}} All available stock is already in cartYou have reached the maximum order quantity availableFor industrial use only. Not intended for consumer sale or use.
Large volume or special order?
Order request{{#distributor.notOnShelf}} {{/distributor.notInStock}}{{#distributor.notInStock}}
{{/distributor.isExpanded}}
{{^distributor.isExpanded}}
{{/distributor.isExpanded}}
{{/distributor.isVisible}}
{{/data}}