LOCTITE® 567 High Temperature Thread Sealant
Known as Loctite 567 Thread Sealant
Features and Benefits
- One component - clean and easy to apply
- Doesn’t creep, shrink or block systems
- Ideal for metal pipes and fittings
- UL MH8007 & ULC MH27131 Classified
- Certified to ANSI/NSF Standard 61 for potable water systems
- Provides an instant low pressure seal
|Agency approvals / certificates / specifications||UL|
|Applications||Pipe Sealing, Thread Sealing|
|Breakaway torque, Steel M10||12.0 N·m (110.0 in./lb. )|
|Cure type||Anaerobic Cure|
|Key characteristics||Immediate Low Pressure Sealing, Oil Tolerant, Strength: Low Strength, Temperature: High Temperature, Thixotropic|
|Operating temperature||-55.0 - 200.0 °C (-65.0 - 400.0 °F )|
|Recommended for use with||Metal, Metal: Aluminum, Metal: Steel - Galvanized Steel, Metal: Steel - Stainless Steel, Thread Type: Coarse, Thread Type: Tapered|
|Viscosity, 20 RPM||540000.0 mPa·s|
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE® SF 7063 or LOCTITE® SF 7070 Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
Starting one to two threads from leading edge of pipe, apply a 360° band to cover at least three thread roots. For bigger threads, apply both on male and female threads. (Recommended dispensing equipment: LOCTITE® Dial-a-Seal® Dispenser)
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F and disassemble while hot.
Where to Buy
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.Go To distributor locator