LOCTITE 567 High Temperature Thread Sealant
Known as Loctite 567 Thread Sealant
Features and Benefits
Available sizes:
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s and service temperature -65° to +400°F (-55° to +200ºC). UL approved.
- Single component - clean and easy to apply
- Doesn’t creep, shrink or block systems
- Provides an instant low pressure seal
- Thixotropic and high/very high viscosity
- UL approved
Documents and Downloads
Safety Data Sheets and RoHs
- 250 ml Tube 10.0/case - IDH 2087069
LOCTITE 567, 250ml 2087069 en-US
IDH:
2087069
EAN:
079340010390
Size Case: 250 ml Tube
Quantity: 10.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Agency approvals / certificates / specifications | UL |
| Applications | Pipe Sealing, Thread Sealing |
| Breakaway torque, Steel M10 | 12.0 N·m (110.0 in./lb. ) |
| Color | Off White |
| Cure type | Anaerobic Cure |
| Key characteristics | Immediate Low Pressure Sealing, Oil Tolerant, Strength: Low Strength, Temperature: High Temperature, Thixotropic |
| Operating temperature | -55.0 - 200.0 °C (-65.0 - 400.0 °F ) |
| Physical form | Paste |
| Substrates | Metal, Metal: Aluminum, Metal: Steel - Galvanized Steel, Metal: Steel - Stainless Steel, Thread Type: Coarse, Thread Type: Tapered |
| Viscosity, 20 RPM | 540000.0 mPa·s |
How to
Step by Step Guide
Preparation
Cleaning - It is recommended to use LOCTITE® SF 7070 Cleaner & Degreaser to degrease and clean surfaces prior to applying adhesive. Activation - If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperatures (below 5°C), use LOCTITE® SF 7649 activator. Allow to dry.
Application
Starting one to two threads from leading edge of pipe, apply a 360° band to cover at least three thread roots. For bigger threads, apply both on male and female threads. (Recommended dispensing equipment: LOCTITE® Dial-A-Seal® Applicator)
Assembly
Assemble fittings using wrench tightening in accordance with manufacturers' recommendations.
Disassembly
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F and disassemble while hot.
Where to Buy
Buy Online
LOCTITE 567
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.
- 250 ml Tube 10.0/case - IDH 2087069
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
What temperatures can threadlockers/thread sealants/gasketing materials work up to?
Are threadlockers/sealants/gasketing materials resistant to gasoline, diesel, engine oil, water, glycol, acids, alkalis, hydraulic fluid, etc.?
Which products can be used on metals/plastics?
What health and safety (H&S) precautions do I need to take with this product?
LOCTITE 567
LOCTITE 567 is an off-white, UL approved, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.