LOCTITE® HY 4070 Universal Bonder
Features and Benefits
- Fast fixturing
- Moisture resistant
- Temperature resistance from -40 to +100°C
- Gap filling up to 0.2 in (5 mm)
- Gel consistency prevents adhesive flow, even on vertical surfaces.
- Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals
- Viscoelastic & Finite Strain FEA data cards available
Documents and Downloads
- 11 g Dual cartridge 10.0/case - IDH 2264448
Size Case: 11 g Dual cartridge
Looking for a TDS or SDS in another language?
|Application method||Dispense System|
|Applications||Bonding Dissimilar Materials, Bonding Plastic, Bonding Rubber, Construction, Direct Bonding, Edge Bonding, Interior Repairs, Structural Bonding|
|Cure type||Room Temperature (Ambient) Cure, Two Component Mix|
|FEA (finite element analysis)||Finite Strain, Viscoelastic|
|Fixture time, Aluminum (etched) 0.5mm gap||<60.0 sec.|
|Gap fill||5.0 mm|
|Mix ratio, by volume||10 : 1|
|Number of components||2 Part|
|Recommended for use with||Composite, Composite: Advanced Composites, Dry Surface, Elastomer: Highly Filled Elastomer, Epoxy, Fiberboard, Gel Coat, Laminate, Metal, Non-Gel Coat, Painted Surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: Cast Urethane, Vinyl, Wood|
|Shear strength, Steel (grit blasted)||25.0 N/mm² (3625.0 psi )|
|Key characteristics, Mixed||Cure Speed: Ultra Fast Cure, Gap Filling, Moisture Resistant, Multipurpose|
|Operating temperature, Mixed||-40.0 - 100.0 °C (-40.0 - 212.0 °F )|
|Casson viscosity, cone & plate, Resin @ 25.0 °C||200.0 - 1300.0 mPa·s (cP)|
|Viscosity, cone & plate, Hardener @ 25.0 °C Shear Rate 1,000 s⁻¹||1.0 - 30.0 mPa·s (cP)|
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070™) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation of Cartridge
Place plunger in the back of the cartridge. Remove cap from cartridge. Dispense a small amount so that material is coming out of both sides. Attach mix nozzle and dispense a bead at least half of the length of the nozzle. The material is ready to use.
Apply a bead of material to one of the surfaces to be bonded. Join the parts and fixture in a way to prevent movement of the part until handling strength is obtained.
Where to Buy
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.Go To distributor locator