Structural adhesives
Tough, flexible adhesive for oil-based applications
This tough, flexible, 2-part adhesive is specially formulated for oil-based applications, and has excellent resistance to hydraulic fluids, fuels and chemicals.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® EA 9430 is a 2-part, modified epoxy adhesive that forms bonds resistant to water, salt spray, and many common industrial fluids. At room temperature it reaches full cure in one week, allowing time for readjustments, and cure can be accelerated with heat. Due to this long open time, it can also be used for large potting applications, e.g. in gas separation filters. And its tough, flexible nature makes it ideal for bonding dissimilar substrates, and for assemblies requiring bondline thickness up to 5 mm (1/10"). You can expect very high peel strength, excellent shear strength, high temperature stability, and low shrinkage rates.
-
Resistant to hydraulic fluids and fuels
-
Long open time
-
High temperature stability
-
Low shrinkage
-
Tough & flexible
Applications:
Structural bonding
Hardener: Color:
Clear
Hardener: Specific gravity, @ 25.0 °C:
1.0
Hardener: Viscosity:
40.0 mPa·s (cP)
Mix ratio, by volume:
3.78 : 1
Mix ratio, by weight:
100 : 23
Mixed: Color:
Off white
Mixed: Specific gravity, @ 25.0 °C:
1.12
Mixed: Viscosity:
12000.0 mPa·s (cP)
Resin: Color:
Cream
Resin: Specific gravity, @ 25.0 °C:
1.15
Resin: Viscosity:
200000.0 mPa·s (cP) - 400000.0 mPa·s (cP)