Thermal SIL PAD Materials
Thermally conductive, tacky-both-sides, fiberglass-reinforced insulating material
Thermally conductive, fiberglass-reinforced silicone insulator pad, which performs well under clamping pressure. Perfect for high performance applications requiring electrical isolation and cut-through resistance.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
When you’re working with high performance applications where electrical isolation and cut-through resistance are paramount, try BERGQUIST® SIL PAD TSP A2000. This electrically insulating, silicone based, thermally-conductive material consists of a cured silicone elastomeric compound coated on both sides of a fiberglass reinforcement layer. It performs brilliantly under clamping pressure up to 200 psi, and is offered as 305 mm x 305 mm (12" x 12") sheets, 305 mm x 250 rolls (12" x 250 rolls) or in custom configuration on request.
-
Thermal impedance: 0.42°C (33°F) -in2/W (@50 psi)
-
Elastomeric compound coated on both sides
-
Less sensitive to clamping pressure due to smooth surface finish
Carrier film thickness:
0.051 mm
Dielectric breakdown voltage:
6000.0 Vac
Dielectric constant, @ 1kHz:
7.0
Flame rating:
V-0
Operating temperature:
-60.0 °C - 180.0 °C
Phase change temperature:
60.0 °C
Shore hardness, ASTM D2240, Shore A:
80.0
Standard thickness:
0.254 mm
Thermal conductivity:
2.0 W/mK
Thermal impedance, ASTM D5470, @ 50 psi:
0.42 °C-in²/W
Volume resistivity:
1×10 Ohm m