Adhesive accelerators
Instant adhesive for accelerating cure and curing excess adhesive
Cure-speed accelerator for LOCTITE® instant adhesives, for a great cosmetic appearance (no white discoloration). Also ideal for curing excess adhesive.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® SF 7452 is a cure-speed accelerator and excess-adhesive curer for LOCTITE® cyanoacrylate/instant adhesives. Offers an improved cosmetic appearance by avoiding the white discoloration common to instant adhesives. It is suitable for both pre- and post-application, but is especially suited for post-application to ensure rapid fixturing. Perfect for applications that include securing wires or coils to PCBs, tamper-proofing adjustable components, and mounting stand-offs, edge guides and board stiffeners.
-
Not recommended on plastics prone to stress cracking
-
Cures excess adhesive
-
Avoids white discoloration
-
Suitable for pre- or post-application
-
IMPORTANT: this product was upgraded in 2021/22. Use the correct product IDH/item number to ensure correct SDS is downloaded.
Application method:
Post applied,Pre-applied
Color:
Light amber
Key characteristics:
Transparent
How to use
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
If cure speed is too slow, use accelerator LOCTITE® SF 7452 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
FAQ
Accelerator can be applied via brush (pre-application) or spray for post application
The solvent carriers can impact some plastics so pre-testing a small area is always recommended.