Skip to Content
Henkel Adhesive Technologies
Recent searches

      Henkel Adhesive Technologies
      LOCTITE 592 - 50 ml Tube (IDH 209761)

      Thread sealants

      LOCTITE® 592

      White, high-temperature thread sealant paste

      This high-temperature thread sealant lubricates threads to prevent leaks and galling on pipe threads and fittings. Specially formulated to offer easy assembly and removal.

      All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.

      Part no. (SKU/IDH)
      209761

      LOCTITE® 592, 50ml Tube

      Documents

      Technical (1)

      RoHS (1)

      Regulatory (1)

      Information

      LOCTITE® 592 is a thick, white, anaerobic-curing lubricating thread sealant paste, which prevents leaks and galling on pipe threads and fittings. It provides immediate low-pressure sealing and allows the readjustment of fittings shortly after assembly. The joint seals against pipe burst pressure after 72 hours. Suits applications up to 204°C (400°F). Unsuitable for plastic piping.
      • High lubricity prevents galling
      • High viscosity
      • Provides instant low pressure seal

      Application method:

      Brush

      Applications:

      Pipe sealing,Thread sealing

      Color:

      Off white

      Cure type:

      Anaerobic cure

      Key characteristics:

      Corrosion inhibiting,Disassembly: easy disassembly,Temperature: high temperature

      Number of components:

      1 part

      Physical form:

      Paste

      Recommended for use with:

      Metal

      Viscosity, Brookfield - RVF, @ 25.0 °C:

      200000.0 mPa·s (cP) - 500000.0 mPa·s (cP)

      How to use

        For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry. If the material is an inactive metal or the cure speed is too slow, spray with LOCTITE® 736 and allow to dry.

        Apply a 360° bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads to thoroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also. Using compliant practices, assemble and wrench tighten fittings in accordance with manufacturers recommendations. Properly tightened fittings will seal instantly to moderate pressures. For maximum pressure resistance and solvent resistance allow the product to cure a minimum of 24hours.

        Remove with standard hand tools. Where hand tools do not work because of excessive engagement length or large diameters (over 1"), apply localized heat to approximately 250 °C. Disassemble while hot.

        Cured product can be removed with a combination of soaking in a LOCTITE® solvent and mechanical abrasion such as a wire brush.

      FAQ

        An anaerobic-curing adhesive or sealant is one that cures when confined in the absence of air between close fitting metal threads. Once cured between the threads, anaerobic-curing adhesives and sealants prevent loosening and leakage caused by shock, vibration and high pressures. Any material outside the joint will remain liquid and can be simply wipred or washed away after assembly.

      Request a consultation

      Unplanned downtime or lower plant productivity can prevent you from achieving the manufacturing excellence that you are looking for. Consult with our experts to find ways to make your machine more reliable and reduce unplanned downtime to save costs.
      Contact an expert

      Henkel Adhesive Technologies
      Company
      About us
      Locations
      Careers
      News
      Current Customer eShop
      Sustainability
      Help
      FAQs
      Find a TDS
      Find a distributor
      Contact us
      Resource center
      Product search
      Technical & regulatory documents
      Case studies
      White papers
      Webinars
      Brochures
      Social media
      ⓒ 2024 Henkel Corporation. ALL RIGHTS RESERVED
      You are on a United States website