Metal rebuilding materials
Non-sag, steel-reinforced repair putty, can be machined, drilled, tapped, filed
Two-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
If you need a repair putty with a truly metal-like finish, try LOCTITE® EA 3471. This 2-part, non-sagging epoxy putty is easy to apply with no need for heating or welding, and can be machined, drilled, tapped or filed. It’s perfect for repairing non-structural defects in castings; making jigs and fixtures; sealing vessels, tanks and valves; resurfacing worn air seals, and filling cavitated areas. You can rely on an operating temperature range of -30°C to 105°C (-22°F to 221°F).
-
Cures to a metal-like finish
-
Superior adhesion on metal surfaces
-
Bonds well to all metal substrates
-
Won't sag or shrink
-
Rebuilds worn parts fast
Fixture time:
180.0 min.
Mix ratio, by volume:
1 : 1
Shear strength:
20.0 N/mm²
Work life:
45.0 min.