LOCTITE® 454 Instant Adhesive Gel
Known as Loctite 454 Prism Instant Adhesive Gel
Features and Benefits
Available sizes:
- Universal instant adhesive gel
- Will not drip or run
- Perfect for all quick repairs
- Ideal for overhead application and vertical faces
- Non-wicking, specially suited to porous materials
- Bonds similar or dissimilar substrate combinations of wood, metals, ceramics, most plastics
Documents and Downloads
- 30 g Syringe 10.0/case - IDH 1337712
- 10 g Syringe 10.0/case - IDH 231346
Size Case: 30 g Syringe
Quantity: 10.0/case
Size Case: 10 g Syringe
Quantity: 10.0/case
Looking for a TDS or SDS in another language?
Technical Information
Application method | Dispense System, Manual |
Applications | Overhead/Vertical Application, Repairing |
Color | Clear |
Cure type | Moisture Cure |
Fixture time, Steel | 45.0 sec. |
Gap fill | 0.25 mm |
Key characteristics | Fixture: Fast Fixture, General Purpose, Tensile Strength: High Tensile Strength, Viscosity: High Viscosity |
Operating temperature | -40.0 - 120.0 °C (-40.0 - 250.0 °F ) |
Physical form | Gel |
Recommended for use with | Elastomer, Metal, Plastic, Porous Surface |
Shear strength, Mild Steel (grit blasted) | 20.9 N/mm² (3030.0 psi ) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070™) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770™ to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use appropriate activator LOCTITE® SF 7452™ (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452™. Spray or drop activator onto excess product.
Equipment
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.