LOCTITE® 401 - Bottle 10.0/case Instant Adhesive
Known as Loctite 401 Prism Instant Adhesive
Features and Benefits
Available sizes:
A surface-insensitive, fast-fixturing instant adhesive that provides high shear strength on a wide range of materials, including difficult-to-bond substrates.
LOCTITE® 401 is a fast-fixturing instant adhesive (industrial grade) designed for the assembly of a wide range of materials where uniform stress distribution and high tensile and/or shear strength are required. Using primer LOCTITE® SF 770, the assembly of difficult-to-bond (PP, PE, PTFE) materials is possible. In addition, it is suited for bonding porous materials such as wood, paper, leather and fabric.
- Universal industrial instant adhesive
- Very high strength on close-fitting parts
- Reduced hazardous ingredients for improved occupational safety
- Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics, as well as most plastics)
- Assembles difficult-to-bond materials using LOCTITE® SF 770 primer
Documents and Downloads
Safety Data Sheets and RoHs
- Bottle 10.0/case - IDH 135429
- Bottle 10.0/case - IDH 135430
LOCTITE® 401, 1 lb Bottle 135430 en-US
IDH:
135430
EAN:
079340401617
Size Case: Bottle
Quantity: 10.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Dispense system, Manual |
| Applications | Bonding close fitting parts, Repairing |
| Color | Clear |
| Cure type | Moisture cure |
| Fixture time, Steel | 5.0 sec. |
| Gap fill | 0.15 mm |
| Key characteristics | General purpose, Strength: high strength, Viscosity: low viscosity, fixture: very fast fixture |
| Operating temperature | -40.0 - 120.0 °C (-40.0 - 250.0 °F ) |
| Physical form | Liquid |
| Recommended for use with | Elastomer, Metal, Plastic, Porous surface |
| Shear strength, Mild Steel (grit blasted) | 20.0 N/mm² (2900.0 psi ) |
| Viscosity | 100.0 mPa·s (cP) |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
2. Preparation - Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
3. Preparation - Activation
If cure speed is too slow, use activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
4. Application
Apply adhesive onto one side/part.
5. Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452. Spray or drop activator onto excess product.
Equipment
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.
Where to Buy
Buy Online
LOCTITE® 401
A surface-insensitive, fast-fixturing instant adhesive that provides high shear strength on a wide range of materials, including difficult-to-bond substrates.
- Bottle 10.0/case - IDH 135429
- Bottle 10.0/case - IDH 135430
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorFrequently Asked Questions
What does “non-HQ formula” mean?
Why does my plastic crack when I use an instant adhesive?
What health and safety (H&S) precautions do I need to take with this product?
Why is there a white haze on my parts around the bond area?
Do instant adhesives need to be refrigerated?
Which products are food / drinking water approved?
LOCTITE® 401
A surface-insensitive, fast-fixturing instant adhesive that provides high shear strength on a wide range of materials, including difficult-to-bond substrates.